- Sample Pictures -
|
|
|
| Die Struck No Enamel with Antique Finish | Die Struck No Enamel with Two-Tone Finish |
|
|
|
| 3-D Die Struck No Enamel | |
- Price List -
(Made of copper, standard thickness, highly polished, nickel plated with sandblasted two-tone finish.)
PLEASE REFER TO THE DIE STRUCK SOFT ENAMEL SECTION BELOW FOR PRICING.
- Sample Pictures -
|
|
- Price List -
(Made of copper. Prices include up to 4 colours, nickel plating. For over 4 colours, add 5¢ each colour (C) for sizes 1" & under; 9¢ each colour (C) for sizes over 1". For sandblasted two-tone background, add 10% to unit price.)
Note: All prices are subject to change. Please contact us for the final estimate.
| SIZE | THICKNESS | 250 | 500 | 1000 | 3000 | GOLD PLATING | DIE CHARGES |
| 5/8" | 1.3mm | 1.20 | 1.04 | 0.92 | 0.85 | +0.12 | 120.00 |
| 3/4" | 1.3mm | 1.29 | 1.12 | 1.00 | 0.93 | +0.15 | 130.00 |
| 7/8" | 1.3mm | 1.45 | 1.26 | 1.12 | 1.04 | +0.20 | 140.00 |
| 1" | 1.3mm | 1.64 | 1.46 | 1.31 | 1.23 | +0.25 | 150.00 |
| 1-1/8" | 1.5mm | 1.89 | 1.69 | 1.53 | 1.44 | +0.30 | 160.00 |
| 1-1/4" | 1.5mm | 2.15 | 1.91 | 1.75 | 1.66 | +0.38 | 175.00 |
| 1-3/8" | 1.5mm | 2.41 | 2.16 | 1.99 | 1.89 | +0.46 | 190.00 |
| 1-1/2" | 1.7mm | 2.77 | 2.48 | 2.30 | 2.18 | +0.55 | 205.00 |
| (4C) | (C) | (G) |
(Minimum quantity: 250 pieces. Less than minimum charge is $50.00 (G). Also, please add 10% to unit price for 150-199 pieces; 20% for 100-149 pieces and 30% for less than 100 pieces.)
| FINDINGS: | Prices include a butterfly clutch back or loop with jump ring. For deluxe tie tack clutch, add 50¢ each (C). For safety pin back, add 5¢ each (C) for sizes 1" & under; 9¢ each (C) for sizes over 1". |
| PIERCING CHARGES: | 5¢
each pierced area (C). Piercing tool charge $25.00 each (G). |
| TWO-SIDED DESIGNS: | Add 10% to unit price. |
| DELIVERY: | 5 to 6 weeks. |
- Background Information -
A steel die is cut and used to strike brass or copper in the same fashion as the Cloisonne/Genuine Hard Fired Enamel process. Once the emblem is created, the pin finding is soldered and the metal plating is applied. Then the enamel paint is carefully applied by hand with a hypodermic syringe, and baked in an oven for several hours to create a durable finish like that of an automobile. Finally, you may wish to add a thin acrylic resin coating, also known as a poly dome, over the surface to give the pin a very smooth feel.
